The Scorpio line of products is designed exclusively for motorcycles. The simple fact that motorcycles don’t have much space available has led us to design ultra-compact components that will fit on all motorcycles.
Put the remote in your pocket and forget about it! All Scorpio alarms utilize RFID technology for “hands free” operation. The smart RFID system will recognize when the alarm’s remote is in range and arm/disarm automatically when the ignition is turned on and off.
Friendly and easy to follow step by step instructions are included with every system. If you have any questions about specific bikes or procedures, you may reach us at our factory direct support at firstname.lastname@example.org.
The simple answer is NO. Scorpio alarms have been optimized to work with motorcycle batteries and draw the least amount of power as necessary. Sleep modes are automatic and limit the draw on the battery without sacrificing security.
Grey Turn Signal wires for our SR series alarms will pulse 12 Volts to any attached wires. If your turn signals are LED based, they are designed to handle loads smaller than 12V (Usually 3-6V). An install of the grey turn signal wires to any LED based turn signal configuration may cause damage to the following (but not limited to): the LED lights, wiring, circuitry, or CANBUS. Aritronix is not responsible for damages resulting from installation of the turn signal input wires.
***Turn Signal application is not necessary for the proper operation/functionality of the unit***
For questions or clarifications, please contact Aritronix/Scorpio Support, or refer to your motorcycle service manual.